Spanish & concrete tile
Tile Roofing in Fort Myers, FL
Fort Myers' architectural hallmark. Premium Boral, Crown, and Eagle tiles fastened with Polyfoam adhesive for extreme hurricane uplift resistance.
Why Fort Myers homeowners choose tile roofing
Tile roofing is the signature roof system of Southwest Florida, prized for its Spanish and Mediterranean aesthetic, exceptional durability, and ability to withstand the region's most severe hurricane conditions. At Monarca Exteriors, we install premium clay barrel tile and concrete flat tile systems engineered to meet and exceed Lee County High-Velocity Hurricane Zone (HVHZ) wind requirements. Each tile is set with a high-strength polyurethane foam adhesive rather than mechanical fasteners, creating a monolithic bond that resists uplift forces at wind speeds exceeding 175 MPH. Beneath every tile roof we install a self-adhering modified bitumen secondary water barrier (SWR) that keeps your home dry even if individual tiles are displaced during a storm. A properly installed tile roof in Fort Myers will last 50 years or more, lower attic temperatures by up to 22%, and significantly increase the resale value of your property.
Key Benefits
Built to perform in a coastal hurricane zone
175+ MPH Wind Resistance
Foam-adhered tile systems form a continuous bond that outperforms nailed tile in hurricane uplift testing.
50+ Year Lifespan
Concrete and clay tile resist UV degradation, salt spray, and tropical moisture far longer than asphalt.
Lower Energy Costs
The thermal mass and air gap beneath tile reduces attic heat transfer, cutting cooling costs up to 22%.
Insurance-Friendly
Wind-rated tile systems frequently qualify for Florida homeowners insurance discounts.
Our Process
How we install your tile roofing roof
01
Inspection & Tear-Off
We remove the existing roof down to the deck, inspect for rot, and replace any damaged plywood or OSB sheathing.
02
Deck Prep & Underlayment
A self-adhering ice-and-water shield and synthetic underlayment create a waterproof secondary barrier.
03
Foam Adhesive & Tile Set
Polyurethane foam adhesive is applied and tiles are set in courses with proper exposure and alignment.
04
Ridge, Flashing & Final Inspection
Ridge caps, valley flashing, and drip edges are sealed, followed by a Lee County final inspection.
Tile Roofing FAQs
Common questions about tile roofing
Ready for a tile roofing built to last?
Get a free 21-point inspection and Lee County wind code compliance report for your Fort Myers property.